Mese: Marzo 2019

Machine description
The bar crusher breaks up the clods previously reduced by the clod mill to further reduce them.
For it to function in the best way, it is necessary to feed the machine over the whole width of the cylinders, and this can be achieved with a suitably wide belt provided with a clay levelling device.
The machine is particularly indicated for the treatment of very dry clays, as it offers a higher quality disintegration.
The machine in the photo, although manufactured in 2014 has never been installed and should therefore be considered as new.

Second hand bricks factory output 50 ton day (clay industry) for sale 

Machine description 
strong structure with support,
drive chain with epicyclical gear reducer,
picker shaft with Bonfiglioli gear reducer,
manual gate on mouth discharge

Machine description

A heavy duty supporting frame enables these box feeders to withstand heavy loads.
The feeding belt is made of pressed steel plates running on three slides.
The belt is driven by a motor keyed onto an epicyclic reduction gear, coaxial to the drive shaft.

Machine description

The MVC 475 extruder is equipped with a mixer driven by an independent engine.
The mixer can be installed in accordance with the requirements either in line or 90° to the extruder unit.
The power transmission from the motors to the drives takes place by means of pneumatically controlled clutches.
All gears can be inspected and removed through the side panels.
The replacement of the blades and panels is eased by the hinged tapered ring which can be opened.

Technical description
Lathe for roller shell new type TRN/S100
Serial number 49-50 Year of production 2017
Tools displacement 1000 mm.
Equipped with:
N. 01 special tools
N. 01 circular tools Ø 12,70 Seco
N. 2 Machines ready to delivery actually located in Algeria

Machine description

Machine suitable to extrude and shape the wet clay in automatic cycle.
Very high reliability and output capacity, the easiness of use and the high effeciency.

Machine description

The discontinuous horizontal single-shaft mixers are constituted by a mixing chamber complete with a loading mouth
a discharge mouth with valve and a venting outlet, a mixing shaft, two plates closing the endsof the chamber
where are placed the bearing complete with adjustable shaft sealing, and a drive unit complete with power transmission. 
Mixing tools in the form of inclined blade rotate in a particular arrangement on the central shaft within the horizontal chamber.